DIY Multiple Cup Turner

  1. Penny says:

    Thank you SO much for this DIY 😀 this is exactly what i was looking for and will help me so much 😀 I really like how you included the images so it is easy to know exactly what is needed and what it looks like..GREAT JOB 😀

  2. Tiffany says:

    How long do I make the pvc arm that is attached to the plunger?

    • lbruno says:

      Hi there and sorry for the late reply, I made mine long enough that I felt like I had enough room to grab it at the top, there is no right or wrong length but I will caution you as to if it is to long you cup will sag.

  3. Chauna Casteel says:

    Did you center the motor on the dowel?

    • lbruno says:

      Sorry for such the late reply and I am sure you have figured it out by now but yes, I used a drill press to make sure the hole was centered on the dowel.

  4. Louann Owens says:

    Do you have these instructions and a supply list that you could send me that I could print out maybe? With pictures if possible.

  5. Impressive guide on this DIY. I really liked it.

  6. Thea Duliba says:

    This blog DIY Multiple Cup Turner helps me a lot with my woodworking projects.

    I also use amazing woodworking plans from here: (or clik on name) 😉 Kiss
    you all!

Leave a Reply to Willard Denesik Cancel reply

Your email address will not be published. Required fields are marked *